Spray Arm Fault - Miele G 7314 Operating Instructions Manual

Problem solving guide

Spray arm fault

Problem
During the programme
and at the end of the
programme, the display
shows the following
message:
Check spray arms
The dishwasher does
not switch off at the end
of the programme.
The crockery may not
be clean because no
detergent was
dispensed. The
 AutoDos function is
automatically
deactivated during the
programme sequence.
92
Possible cause and remedy
The lower spray arm is blocked or the jets of the
lower spray arm are clogged. The  AutoDos
function is automatically deactivated during the
programme because the AutoDos detergent outlet
cannot be completely flushed out.
 Switch the dishwasher off and back on again.
Messages appear in the display.
 Perform a rotation check of the lower spray arm
and rearrange the crockery if it is blocking the
spray arm.
 Clean the lower spray arm (see "Cleaning and care
- Cleaning the spray arms").
 Confirm each message with OK.
 Restart the programme.