Miele G 7314 Operating Instructions Manual page 64

Options
Setting "Start at"
With the Start at function, you set the
exact time at which you want the
programme to start.
 Use the  sensors to enter the
hour and confirm your entry with OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the  sensors to enter the
minutes and confirm your entry with
OK.
The saved start time for the selected
programme will appear in the display for
several minutes.
When the set time is reached, the
selected programme will start
automatically.
The time remaining will be shown in the
display, the  sensor will go out and
the Start sensor will light up.
64
Setting "Finish at"
Use the Finish at function to set the
latest time by which the selected
programme has to be finished.
 Use the  sensors to enter the
hour and confirm your entry with OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the  sensors to enter the
minutes and confirm your entry with
OK.
The estimated start time for the
selected programme will appear in the
display for several minutes.
A message will appear in the display if
the programme cannot be completed
by the set finish time because it has too
long a running time.
 In this case confirm the message with
OK.
The programme will start automatically
when the estimated start time is
reached.
The time remaining will be shown in the
display, the  sensor will go out and
the Start sensor will light up.