Memory; Miscellaneous - Medisana MTR Instruction Manual

5.1 Up to 60 measurements (blood pressure and pulse with time and date
Displaying as well as blood pressure indicator
stored results blood pressure monitor's two memory slots. To call up the automatically
stored values, first choose the memory slot (1 or 2)
"+/A"
Now press the MEM button
tion mode indicator: Memory
values for this user is displayed. After approx. one second an "A"
appears next to the M-Symbol
and diastolic pressure and pulse out of all stored data for this user
are displayed. Is the voice function activated, these values will also
be announced in the selected language. Are no values stored for
this user, a "0" appears. Repeatedly pressing the MEM button
displays the respective average values out of all stored data within
the last 7 days of this user. Is the voice function activated, these
values will also be announced in the selected language. "A7" is
displayed next to M-Symbol
displays the measured values for systolic and diastolic pressure, pulse
and blood pressure indictor
voice function activated, these values will also be announced in the
selected language. You may use the buttons "+/A"
to recall previously stored values. Together with the stored values the
M-Symbol
shown. Press the START
and return to the time & date display. If not button is pressed for more
than approx. 2 minutes, the unit automatically returns to the time &
date display. If all 60 memory locations in a memory are occupied,
a new measured value is saved whilst the oldest value is deleted.
5.2 During the display of stored values (however NOT during the display of
Deleting memory average values "A" or "A7") you can delete the stored values of the
selected user memory slot (1 or 2). Press and hold the MEM button
)
as confirmation for the deletion. Press MEM
START button

6 Miscellaneous

6.1
The batteries low symbol
Troubleshooting
• The batteries are too low or empty. Replace all four batteries with
This unit detects different causes of errors and displays different error
codes (depending on the cause). An eventual measurement will be
interrupted.
resp. "-/B"
% &
and next to it the memory location number
Ü
for at least 3 seconds to delete the values. 3 beeps can be heard
to return to the display of time & date.
(
new 1.5V alkali AA batteries, LR6.
5 Memory / 6 Miscellaneous
) may be stored in each of the
W
. The corresponding symbol will appear:
. A beep can be heard and the opera-
)
lights up. First, the number of stored
$
and the average values for systolic
Ü
. Another press on the MEM button
Ü
of the most recent measurement. Is the
W
button to leave this mode at any time
(
" " appears in the display:
E
with the buttons
U
resp. "-/B"
%
P
button again or press
)
GB
1 2
)
)
&
are
25