Status Led Table - Denon HOME 250 Owner's Manual

Contents

Status LED table

The LEDs on the front panel change to indicate the current speaker status.
Speaker status
Deep Standby mode
Quick Start mode
(dimmed solid)
Power on
Setup Use
LED action
Power is off, or the speaker is in Deep Standby mode. (v p. 50)
(off)
Speaker is in Quick Start mode. (v p. 50)
Speaker is starting up or connecting to the network.
(blink)
Speaker is connected to the network.
(solid)
Speaker is unable to connect to the network.
Try to connect the speaker again.
(solid)
Troubleshooting
Description
56
Status LED Status LED Appendix