Advertisement
NAV VIDEO NavVideo Installation Guide. © 2006.
15
OPTIONAL: Aftermarket Bluetooth Kit Connection
Your GMUNLOCKPRO UNLOCK is already configured to allow the simple integration of an aftermarket
Bluetooth Handsfree kit. Included in your wiring harness, are all the power, ground and audio connections
needed to connect a handfree kit to your vehicle and listen to the sound through your cars' factory sound
system. There is no need to install extra speakers or cut any factory wires. Your Bluetooth handfree kit will
need a constant power source, another which turns off with the radio, ground, a mute connection, and a
place for its line level audio to connect. All these are provided directly on the GMUNLOCKPRO wiring
harness.
The advanced software in your UNLOCK will automatically detect a phone operation in progress and will
activate the ONSTAR function of your radio. The sound from your conversations will be heard through your
sound system automatically and even if your radio is powered off with its power button, the sound will still be
activated (just like ONSTAR). No ONSTAR functions are disabled with the GMUNLOCKPRO so your factory
system will operate just as before, except with the added bonus of easy integration with your cell phone.
Additionally, the GMUNLOCKPRO is preprogrammed to operate with the newest Video Bluetooth integration
kits. These kits can display full menus, address books, caller ID, etc., and with the GMUNLOCKPRO, it
automatically integrates this information directly onto your factory screen.To enable this programming, place
switch 5 in the down position before plugging the UNLOCK module into its harness. Connect the standard
power, ground, and audio wires which are part of any Bluetooth kit installation. Now, plug in the video output
from your video Bluetooth kit, into the Video Source 2 input of the GMUNLOCKPRO module. Note: Your
Bluetooth kit may contain other outputs and control lines, but all of them are unnecessary for the
GMUNLOCKPRO and no other interfaces are needed.
The following instructions are specific to the TellPhone 5000vi Video Bluetooth Kit.
When the TellPhone kit and video output module are powered up for the first time, they take about 90
seconds to initialize. Turn the car on and wait before performing any additional tests of the Bluetooth kit. The
menus, address book, contact lists etc. are easily accessed by turning on the Video 2 source on your
UNLOCK ( select
XM, press window lockout 1x, then mute 4x, followed by Seek
on your radio). All on-
screen Caller ID and other incoming call info are automatically displayed when receiving a call without any
button presses. Additionally, pressing the talk button for voice commands will automatically display on-screen
text and prompts. After the Tellphone has initialized, turn the car off and back on to begin the process of
marrying the remote, setting the language, pairing the first phone, etc. To see the text for these menus,
simply turn on the Source 2 video as described above, and follow the Bluetooth kit instructions. Your
GMUNLOCKPRO requires a only couple of seconds when the car is first turned on before it can access the
video functions so allow a brief moment before you turn on the video source.
Advertisement
