Ledgerware 6U Server Rack Mount Case Assembly Instructions Manual page 4

LEDGERWARE
Step 1: Unboxing
 Open the box and remove the case from the shipping foam and
plastic cover.
 Remove the accessories kit (bag or box) from the box.
 Remove the risers and riser components from the box.
 Remove the GPU Safety Bar from the box.
Step 2: Open the Case
Remove the two screws from the back of the case that keep chassis
top from sliding backwards with a Phillips head screwdriver.
(Note: these screws are not the thumbscrews that open the fan door
on the back of the case.
Slide the chassis top backwards and set the chassis top aside.
6U Server Rack Mount Case
Assembly Instructions
4