End Of Life; General Maintenance - S&S Northern Merlin CO2 AVG Installation & Operation Manual

Installation & Operation Manual

End of Life

This indicates that the device requires immediate replacement.
The gas monitoring elements are expected to last for 10 years from initial
installation and power up depending on environmental factors.
Contact your supplier.

General Maintenance

Keep your detector in good working order follow these basic principles;

DO carefully remove any accumulated dust from the outer enclosure once a month.

NEVER use detergents or solvents to clean your device – this may permenantly or
temporarily damage the gas sensing elements.

NEVER spray air fresheners, hair spray, paint or other aerosols near the device.

NEVER paint the device. Paint will seal vents and interfere with the device.
High concentrations of alcohol found in many products may damage, deteriorate or affect
the gas sensing elements – such as; wine; deodorants; stain removers; thinners etc.
Our CO monitors are designed to automatically recalibrate using background CO
2
For maintenance purposes, our monitors should be exposed to fresh air frequently to aid with
this recalibration procedure.
Rev: 08 07-20
Merlin CO2 Monitor AVG TFT
levels.
2
6