Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-1451
13.3" TOUCH SCREEN
This instruction sheet is for the Gamber-Johnson Touch Screen only. For instructions on
features, set-up, and operation of any computer or connected device, please refer to the
manual provided with those products.
This touch screen is designed to be used with a variety of mounting systems. Installation
instructions for other Gamber-Johnson products are provided with each individual product.
This instruction sheet is for the following products:
Item No. 7160-1451-00 Bare Wire Power, HDMI and USB Type B
The touch screen is designed to handle a 11-16Vdc input and Gamber-Johnson
recommends using the bare wire cable included. The standard use voltage is 12Vdc and a
minimum 5A. Gamber-Johnson offers the following Power Adapters to power the touch
screen if needed in other enviroments. These Power Adapters can be ordered from
Gamber-Johnson separately.
7300-0476
- AC
7300-0461
- Auto
7300-0462
- Auto
7300-0464
- Isolated (12-32Vdc input)
7300-0465
- Isolated (20-60Vdc input)
7300-0417
- Isolated (72-110Vdc input)
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868.
(100-240Vac input) 2-prong standard AC plug
(11-16Vdc input)
Bare Wire
(11-16Vdc input)
Cigarette Adapter
Bare Wire
Bare Wire
Bare Wire
Revision
Rev. A
Printing Spec: PS-001
Form
INST-985
1 / 9
Advertisement
Table of Contents
Summary of Contents for Gamber Johnson 7160-1451
- Page 1 Gamber-Johnson products are provided with each individual product. This instruction sheet is for the following products: Item No. 7160-1451-00 Bare Wire Power, HDMI and USB Type B The touch screen is designed to handle a 11-16Vdc input and Gamber-Johnson recommends using the bare wire cable included.
-
Page 2: Pre-Installation Recommendations
PRE-INSTALLATION RECOMMENDATIONS Gamber-Johnson (GJ) recommends the positioning of all mounts and equipment in the vehicle prior to the actual install to verify mounting locations are safe and practical. Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and software issues are resolved prior to installation. -
Page 3: Feature Identification
FEATURE IDENTIFICATION Touch Screen 5-point capacitive touch provides a highly responsive feel but will not work with gloves. Power Indicator Light No light indicates no power. Red light indicates off. Green light indicates on. Auto Brightness Sensor Detects ambient light and adjusts the screen brightness. -
Page 4: Port Identification
QUICK BUTTON IDENTIFICATION Emergency Black Out Power On/Off Source Escape Brightness (-) Volume (+) Menu Home Brightness (+) Volume (-) PORT IDENTIFICATION Power Input HDMI Audio Out USB2.0 Type B USB3.0 Type C 11-16Vdc Used for touch and (Fast Charging) 1.5 A USB3.0 5A minimum USB port function when... -
Page 5: Installing The Touch Screen
INSTALLING THE TOUCH SCREEN INSTALLATION - Power It is recommended to have at least 5A avaialble to power the screen. The input is 11-16Vdc. It is recommended to wire the screen to ignition or a timer to prevent the battery from draining. Make sure power is off before performing any install steps. -
Page 6: Using The Touch Screen
USING THE TOUCH SCREEN OPERATION - Power Upon applying power, the Power Indicator Light should be green. If there is no light, there is no power to the screen.The POWER button can be used to turn off the screen, and the Power Indicator Light will turn red. - Page 7 USING THE TOUCH SCREEN OPERATION - Source and Menu Within the source and menu options, the VOLUME UP and DOWN buttons are used to move left and right. The MENU button is used to "Select" and the SOURCE button to go "Back". These option panes are NOT touch screen;...
- Page 8 TOUCH SCREEN DETIALS SPECIFICATIONS Power Input Range 11-16Vdc Voltage Rating 12Vdc Current Rating Dimensions 13.74" (349.0mm) W x 9.93" (252.2mm) H x 1.57" (39.9mm) D Weight 6.75 lbs (3.06kg) Operating Temperature -20 C to 70 C (-4 F to 158 F) Storage Temperature -40 C to 85 C (-40 F to 185 F) Resolution...
- Page 9 REGULATORY CERTIFICATION INFORMATION Regulatory Model #: 7160-1451 GJ Model #s & Description: 7160-1451-00 13.3" TOUCH SCREEN Certifications: • EN 55032: 2015 / AC: 2016, Class B • EN 55035: 2017 This device complies with Part 15 of the FCC Rules. Operation is subject to the...