Application Configuration Url - Vivotek IP3136 User Manual

contrast <-5 ~ 5>
hue <-5 ~ 5>
saturation <-5 ~ 5>
preview <not required>
restore <not required>
save <not required>

Application configuration URL

URL: /setup/app.cgi
NAME VALUE
emode <not required>
smode <not required>
smethod mail
ftp
suffix <not required>
delay <integer>
inter <integer>
motion1 < not required >
motion2 < not required >
motion3 < not required >
sinter <integer>
sbegin <hh:mm:ss>
send <hh:mm:ss>
adjust contrast of image
adjust hue of image
adjust saturation of image
not save the parameters
recall the original settings
save the parameters
DESCRIPTION
Upload snapshot
detected
sequential mode application
upload snapshots by email
upload snapshots by FTP
FTP file with date and time suffix
seconds delay to detect next event
seconds delay to capture post-event
set motion
condition
set motion
condition
set motion
condition
seconds interval for sequential mode
time to start sequential mode
time to stop sequential mode
- 60 -
when motion
window1 as trigger
window2 as trigger
window3 as trigger
www.vivotek.com