PowerMax Hip Flexor Quick Start Manual

www.powermaxequipment.com
855-232-4666
Hip Flexor (TA1511)

Components:

(2) Hook and loop fastened thigh straps, (1) Hook and loop fastened belt, (2) carabineers

Attachment Instructions:

Attach the weight bands by placing them around the middle of your thigh with the hook and loop fastening in
the front. Secure band in place with hook and loop straps. Side strap should be on the outside of your leg. You
may shorten the side straps by pulling down on the free end. To lengthen pull buckle tab up.
Attach the straps to the hip belt through the metal D-ring. For MaxBelt clip through best fit nylon loop.

General Use Instructions:

When using the Hip Flexor, be sure the weight bands fit comfortably on your thighs.

Disclaimer:

All PowerMax Products should be used only for their intended purposes and only in accordance with the
instructions. Please read the instructions prior to use. Improper use and /or failure to follow the instructions
may result in serious injury. The use of PowerMax Products involves strenuous physical activity. You should
consult your physician before use of the PowerMax product. Gill Athletics, Inc. assumes no liability for
accidents or damage that may occur with the use of PowerMax Products.