Donner DED-100 Instruction Manual page 17

SAFETY PR ECAUT ION S
WARNING
Smoke, odor, overheating
When the product smokes, smells or
overheats, there is a danger of fire and
electric shock when it is used continually.
In case of the above situation, the following
operations should be performed immediately:
1. Turn off the power supply.
2. Pull the plug out of the power outlet.
3. Contact your dealer.
Power cord
1. The improper use of power cord may
cause fire and electric shock. The following
precautions must be observed:
● The special power cord designated for
this product must be used.
● The AC power supply with output
voltage within the rated voltage range
for household use must be used.
● Do not overload power sockets and
extension lines.
2. The improper treatment of power line
will lead to its damage or breakage,
which will cause fire and electric shock
hazards. The following precautions must
be observed:
● Do not place or heat heavy objects on
power lines.
● Do not attempt to alter or bend the
power cord too much.
● Do not twist or pull the power cord.
● If the power cord or plug is damaged,
please replace the same type of power
cord.
3. Do not touch the power cord and plug
with wet hands, otherwise there is a
danger of electric shock.
4. Please use the power cord where the
water will not splash. Water is in danger
of causing fire and electric shock.
5. Never place vases or any other container
containing water on this product. Water
is dangerous of causing fire and electric
shock.
6. Do not allow minors to unplug and touch
power lines or connection boards. Minors
have no common sense of electricity
safety, which may cause electric shock.
BE CAREFUL
The improper use of power cord may cause
fire and electric shock. The following
precautions must be observed:
● Never put the power cord near the oven
or other heat source.
● Do not pull the cable when pulling out of
the power socket. The main body of the
plug must be grasped.
● The power cord plug must be inserted in
the socket to the end.
● Make sure the power supply is off before
connecting or disconnecting it.
● When thunderstorms occur or before
traveling or other long-term departure,
disconnect the power cord from the wall
outlet.
● At least once a year, remove the power
cord from the wall outlet and clean the
dust accumulated around the plug.
Do not burn this product
Do not put this product in the fire,
otherwise it will lead to product
combustion and explosion of internal
electronic components, which will cause
fire and personnel injury.
Water and foreign bodies
Water, other liquids and (metal sheets, etc.)
entering this product are in danger of
causing fire and electric shock. In case of
the above situation, the following
operations shall be performed immediately:
1. Turn off the power supply.
2. If you are using a power cord for power
supply, unplug it from the wall outlet.
3. Contact your distributor.
Disassembly and transformation
Do not disassemble or transform the
product in any way, otherwise there is a
risk of electric shock, scald or other
personal injury. All internal inspection,
adjustment and maintenance operations
should be entrusted to your distributor.
www.donnerdeal.com
16