Samsung HW-K850 User Manual page 16

Accessories for Wall-mounting
Bracket-Wall Mount (2 EA)
Holder-Screw (2 EA)
Screw (2EA)
Wall Mount Guide
1. Place the Wall Mount Guide against the wall
surface.
The Wall Mount Guide must be level.
If your TV is mounted on the wall, install the
Soundbar at least 2 inches (5 em) below the
TV.
· ~·
2. Align the Paper Template's Center Line with the
center of your TV (if you are mounting the
Soundbar below your TV), and then fix the Wall
Mount Guide to the wall using tape.
,; If you are not mounting below a TV, place the
Center Line in the center of the installation area.
I
Center Line
J
3. Push a pen tip or sharpened pencil tip through the
center of the C-TYPE images on each end of the
Guide to mark the holes for the supporting
screws, and then remove the Wall Mount Guide.
4.
Using an appropriately sized drill bit, drill a hole in
the wall at each marking.
,; If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors or mollies into the holes
before you insert the support screws. If you use
anchors or mollies, make sure the holes you drill
are large enough for the anchors or mollies you
use.
CTYPl •700mm
5. Push a screw (not supplied) through each
Holder-Screw, and then screw each screw
firmly into a support screw hole .
....
6. Install 2 Bracket-Wall Mounts in the right
orientation on the bottom of the Soundbar, using
2 Screws (M4 x L 12). (See page 16)
· 15 · English