28
Independent adjustable speeds
Replace the speed adjust potentiometer with a single pole, multi-
position switch, and two or more potentiometers in parallel, with
a total parallel resistance of 10K ohms. Figure 12 shows the
connection of two independent speed adjust potentiometers that
can be mounted at two separate operating stations.
Figure 12. Independent Adjustable Speeds
Application Notes
SPEED 1
SPEED 2
SO502 3-PIN HEADER
Use customer supplied
Molex connector #09-50-3031 to mate
with 3-pin header (SO502) on control board.
20K
20K
OHM
OHM
CW
CW