Table of Contents
Advertisement
Projector
User's Manual
Other Related OSD Menus
Following are the descriptions on the on-screen display menus with video input sources
and without input source attached to your projector.
Video Input Signal
If the input signal comes from composite video(video), S-video or component video
(YCbCr), you may see different PICTURE menu and VIDEO menu interface.
Picture Menu
This menu provides precise control of the projected image including:
brightness, contrast, saturation, tint and sharpness(video signal).
Changing settings procedure (using either the Projector Control Panel or the Remote
Controller):
1.Press the MENU button to display OSD
menu.
2.Press the
PICTURE menu.
3.To enter the sub-menu setting, press
the MENU button once again.
4.Press the
sub-menu item.
5.Press the
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the
b.To exit from the current menu: toggle the MENU button.
EN-28
or
button to select
or
button to select the
or
button to adjust the value of desired sub-menu item.
or
button.
Advertisement
Table of Contents
