Connecting To A Video Source - Vivitar DP-1200 X User Manual

Connecting to a Video Source

Y Cb Cr (Component Video Cable)
Y
AV Composite Cable
You can connect the projector to almost any common video source - VHS player, DVD
player, camcorder, laser disc player or any other compatible video image source.
The projector can accept composite, component, or S-Video signals:
Composite video is characterized by a single-pin "RCA-type" video jack, usually
colored yellow.
Component video (YCbCr) is less common and features three "RCA-type" video
jacks, typically colored green, blue and red.
S-Video is readily identified by a single connector with four small pins.
You can connect the projector simultaneously to composite, component, and S-
Video sources. You can select which video source to project using the control panel
or remote controller. If the Auto Search feature is ON (see later sections of this
manual), the projector will automatically detect and select a source. The projector
supports NTSC, PAL and SECAM video formats. The projector will automatically
detect and identify the video format. Note, however, whereas the projector can accept
multiple simultaneous sources it can only accept one video format at a time.
Note:
The projector is not compatible with a cable TV-style coaxial "F" connector.
S-Video Cable
IN
IN
R/W
OUT
User's Manual
OUT
OUT
DVD Player
Video out VCR
Projector
○ ○ ○ ○ ○ ○ ○ ○ ○
EN-13