Projector
User's Manual
4.Press the
5.Press the
value of desired sub-menu item.
On the Projection and Auto Off
sub-menus, press the
to select the desired setting.
On the Lamp Life sub-menu, the
lamp's lifetime counter is calculated by
the projector system.
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the
b.To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-Menu
OSD Timeout
OSD PosiH
OSD PosiV
Projection
Auto Off
Lamp Life
EN-26
or
button to select the sub-menu item.
or
button to adjust the
or
Option
Description
Duration OSD menu stays active (at idle state).
Adjusts OSD menu display position
(horizontally - left & right) on the screen.
Adjusts OSD menu display position (vertically - up
& down) on the screen.
Sets the projection display.
Front
The image is projected directly on the screen.
Rear
The image is reversed horizontally.
Ceiling
The image is inverted vertically.
Automatically turns off the lamp if the projector does
not detect an input signal for specified time period
(30 minutes).
On
Auto Off is active.
Off
Auto Off is inactive.
Displays lamp's lifetime counter (by hour).
button
or
button.