Table of Contents
Advertisement
Your Napa La Mer table comes completely assembled and ready to use.
Once the table is unpacked, follow the "Moving Your Table" instructi ons below.
Moving Your Table
Lift your table by grasping fi rmly from the bott om of the frame underneath the
upholstered top. Do not try to lift from the upholstered top.
Leveling Your Table
Leveling, or balancing, your table is very important during initi al setup and routi ne maintenance.
Your table is equipped with leveling feet that can adjust to uneven fl oors.
To adjust the leveler feet:
1. Place the table in the positi on you plan to use it.
2. To determine which foot needs adjusti ng, att empt to "rock" your table. If there is any
movement, the leg that is lift ing is the one that will need adjusti ng.
3. Raise table height approximately 6 inches.
4. Using your hand, or a wrench if necessary, turn the leveling foot in the needed directi on.
(Counterclockwise will lower the overall height, clockwise will raise the overall height)
Weight Capacity
500 lbs.
Always use cauti on when moving your table - always use proper safety
procedures/equipment.
The Napa La Mer is powered by a manual hydraulic lift system.
The recommended weight capacity is 500 lbs.
SECTION 3: INSTALLATION
5
Advertisement
Table of Contents
