Vivitar ViviCam 5018 Owner's Manual page 10

Power on your camera, the default mode is Camera mode.
1. Hold the camera steady and compose your object as appears in the LCD screen.
2. Press the Shutter button and wait a moment for the photo to be is taken.
Note: When the internal memory is full, the LCD screen will display "Memory Full! Insert a SD Memory Card
to Transfer and Take More Photos!" If you attempt to take photos or videos when the camera's internal
memory is full, the camera will beep continuously. Please download the test images to your computer as soon
as possible or insert an SD memory card in order to take more images!
Flash
Your camera has a built in flash function which enables you to take photos when the light condition is not good.
1. Press the Up button.
2. The icon
3. Press the Up button again.
4. The icon
activated.
5. Press the Up button once more until you see the icon
that the flash is forced on.
6. To turn off the flash function, press the Up button again until the icon
will appear on the LCD indicating that the auto flash is turned on.
will appear on the LCD indicating that the red eye reduction function has been
appear on the LCD screen. This indicates
9
is displayed on the LCD.