Maintenance; Warranty Return Procedure; Warranty Guide - Paul Mitchell Pro Tools turnstyle+ Instructions, Safety And Warranty Manual

Daily Maintenance: For the safe use of the iron, check the
following daily:
• Check the cord and surface of the cord. Never use if
any parts are cracked, split, torn, or damaged.
• Check the plug and never use if cracked, split,
or damaged.
• Check the plug pins and never use if transformed
or damaged.
• Check the controller and do not use if cracked, split,
broken, or damaged.
• When not in use, clean and dry the entire iron and store in
a cool, dry place.
When ready to use, follow the directions for daily maintenance.
Daily Cleaning: To keep the barrel clean, unplug the iron from the
power source. Once the barrel is cool, wipe it down after each
use with a hot, damp towel.
WARNING: Do not wipe the iron with thinner, benzene, gasoline,
lamp oil, and other solvents or chemicals, as that may cause
accidents or malfunction, or damage the iron and void the
warranty.
Defects and Malfunction
• Read all contents of the warranty completely and
carefully before contacting the salon, the distributor, or
pmprotools@paulmitchell.com 1-888-522-8622.
• The iron is covered under under limited warranty for 12
months from the date of purchase.
• John Paul Mitchell Systems
caused by misuse or due to operator accidents, such as
dropping the appliance on the floor.
RETURN PROCEDURE
For all warranty issues please call 1-888-522-8622 or email
us at pmprotools@paulmitchell.com for further instructions
A purchase receipt is required for all warranty claims.
IMPORTANT: Warranty valid only when appliance is purchased
from an authorized PAUL MITCHELL
Warranty valid only for the Express Ion Turnstyle+.
Terms and conditions may vary depending on salon/authorized
retailer's individual exchange or return policy.
LIMITED 12-MONTH WARRANTY
Our 12-month warranty covers tools within the U.S. (Alaska,
Hawaii, Puerto Rico and Continental U.S.) and Canada only, and
only when purchased from an authorized PAUL MITCHELL
or distributor. The Paul Mitchell
the appliance against defects in material or workmanship for
12 months from date of purchase.
Sorry, no refunds will be given.

MAINTENANCE

WARRANTY
and a return address.

WARRANTY GUIDE

IMPORTANT WARRANTY NOTICE
(Please read details below)
is not responsible for damage
®
salon or distributor.
®
Pro Tools
® ™
salon
®
warranty covers