Commissioning Steps - TCS FBO1200-0400 Product Information

04/2013

Commissioning steps

 Install the devices of the TCS system completely and connect the FBO1200 to the tele-
phone system (see wiring example).
 Check the a-, b- and P-wire against each other on short-circuits.
 Switch on the mains voltage.
 The yellow LED (status PBX / PSTN) flashes 4 times ON, once with a long break.
(blink mode: also see Indication and operating elements, page 5, )
 First check the connection of the FBO1200 to the telephone system with a call to the
telephone number which is assigned to the FBO1200 from the telephone system.
 Check the connection of the FBO1200 to the front-door station by pressing the but-
ton 1 as well as the function of the buttons 7 and 8. The conenction can be ended
by pressig the button 9 or by hanging up the handset.
Thus, the system is basically ready to operate and can be configured.
If the commissioning check is not successful, errors may have occured.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129  Mail: hotline@tcsag.de
9
Subject to technical changes.
PI_FBO1200-uk
The TK-Interface
accepts, sends aQ
Call at the TK-
*
Interface
1A