Advertisement
Power
When the heater is plugged in, press POWER to set the functions. The right part of the
display will show "
" Press POWER again to reset the functions. The right part of the
display will now show the " " and "
"symbols.
Mode
Press "5-mode" to regulate the low (
) and high (
) temperature power mode.
Temperature
The internal temperature is displayed every time the heater is turned on. The temperature
can be set when the heater is either in standby mode or actively heating. When the room
temperature reaches the set level, the high temperature power stops and the low
temperature power mode will remain active.
When the room temperature is 2 degrees over the set temperature, both the high and low
temperature power modes will stop operating. The heater will begin operating again only
when the temperature decreases 2 degrees with respect to the set temperature. The
temperature regulation range is 15°C - 35°C.
Power
The timer button can be set to start or stop the heater at the desired time, with a timer
interval between of between 1 to 24 hours.
Operating Sound
The heater will emit a beep tone upon each successful operation setting.
Memory
The heater can store the last temperature setting in its memory. This temperature will be
shown at start-up. If the power settings are different, start-up reset will go to those set as
default.
Advertisement
