Page 1
OWNER'S MANUAL SMOGHOG Media Mist Collector ® l Models: sHM-C & sHM-F Model SHM-11C Shown...
Page 2
Should you need assistance, call the United Air Specialists, Inc. customer service number shown below. To expedite your service, have the following information available when contacting UAS. UAS ORDER #: ________________________________________________________________ UNIT MODEL #:________________________________________________________________...
SAFETY PRECAUTIONS We have provided many important safety messages in this manual on your SMoGHoG SHM. always read and obey all safety messages. this is the safety alert symbol. this symbol alerts you to potential hazards that can kill or hurt you and others. all safety messages will follow the safety alert symbol and the word “danGer”...
SMoGHoG reV: 16i ® SHM Series Models Filter Elements 3. INSTALLATION Stage 1: Mist-Stop fine fiber aluminum mesh 3.1 INSPECTION AND OFF LOADING Stage 2: Primary coalescer featuring PeacH Saturated ® depth coalescing technology - or - fiberglass bag as soon as your equipment arrives, it should be carefully inspected to make certain that it is in good condition and Blower Cabinet that all items listed on the packing list have been received.
SMoGHoG reV: 16i ® SHM Series Models 3.2 INSTALLATION PREPARATION AND work. this includes the unit and electrical controls. ensure to leave an appropriate amount of room around your PLANNING unit to allow for maintenance and servicing. a minimum Prior to the actual installation of the SHM, the location of 2-1/2 feet (0.76 m) of clearance is recommended for should be readied.
SMoGHoG reV: 16i ® SHM Series Models 3.4 MECHANICAL INSTALLATION CAUTION D A N G E R the SMoGHoG should not be used for support of personnel or material. check with local building code/ CRUSH HAZARD structural engineer to ensure proper installation to roof truss or any other mounting method.
SMoGHoG reV: 16i ® SHM Series Models 3.5 ELECTRICAL CONNECTION Descrip�on of Wire Diagram Appendix Basic Controls the SHM is available with various controls configurations. refer to the section headings below and follow the Remote Panel Basic Controls section instructions that best align with your specific unit. One Blower &...
SMoGHoG reV: 16i ® SHM Series Models 3.5.3 ELECTRICAL TOUCHSCREEN with a dry-contact off another piece of equipment. refer to the wiring diagrams in the appendix for wiring of this CONTROLS option and to Section 4 for Machine interlock set up on the main control panel for the SHM unit is a touchscreen the touchscreen.
SMoGHoG reV: 16i ® SHM Series Models 3.6.1.2 ENCLOSED 6. Press the blower power button on the Home screen to begin operation. note that if the oil mist collector is for units with an after-filter cabinet/enclosure, the after- connected to a process, other equipment will need to filters must be installed into this cabinet.
SMoGHoG reV: 16i ® SHM Series Models 4.3 TOUCHSCREEN OPERATION 4.3.2 STANDARD FORMAT the icon key, table 3, outlines the various icons that are 4.3.1 START-UP AND HOME SCREEN used on the screen for various reasons and may indicate status or conditions. the Home, Settings, and information the display will turn on automatically when the system is icons are shown at the bottom of most screens and will powered up.
SMoGHoG reV: 16i ® SHM Series Models 4.3.3 BASIC SCREENS number between 20 and 100. this will correspond to the percentage of blower capability. the blower is capable Filter Screen: of 4,200 rPM at 100%, 3150 rPM for 75%, 2100 rPM for 50%, and 1050 rPM for 20%.
SMoGHoG reV: 16i ® SHM Series Models 4.3.5 AFTER-FILTER device is in operation. When this option is selected (see figure 20) the Blower Power button in figure 6 will put the unit in standby when touched by the operator. When this setting is selected the indicator to the right side will change from off to on and turn green.
Page 18
SMoGHoG reV: 16i ® SHM Series Models the auto-flow Settings screen can be selected in the Locked Settings group on the customer settings screen. the auto-flow is an option that is selected at order time and loaded into the SHM at the factory. the auto-flow Settings will allow the unit to maintain a precise operating point based on a desired air volume.
SMoGHoG reV: 16i ® SHM Series Models 5.2.1 INSTALLATION PROCEDURE FOR for units that are two filters deep, be sure to push the first filter all way toward the back of the primary filter cabinet PEACH SATURATED DEPTH FILTER ® until it contacts the stop.
6. TROUBLESHOOTING GUIDE use the troubleshooting guide to correct any problems WARNING that occur with your oil mist collection unit. if the problem or condition continues, contact the uaS customer service all electrical/mechanical troubleshooting should be office. performed by a qualified electrician/maintenance individual familiar with uaS equipment.
SHM Series Models 7. REPLACEMENT PARTS to order replacement parts, refer to figure 6. order through your local uaS representative or contact united air Specialists at 1-800-252-4647. Please have the unit model number, serial number (from component access door) and part numbers available when ordering.
Page 36
UAS is limited to furnishing replacement parts F.O.B. UAS’ factory or making repairs at UAS’ factory of any parts that are determined, upon inspection by UAS, to be defective. In no event will UAS be responsible for labor or transportation charges for the removal, reshipment or reinstallation of the parts.
Need help?
Do you have a question about the SMOGHOG SHM-C Series and is the answer not in the manual?
Questions and answers