Sony NW-E393 How To Use Manual page 95

Help Guide
[113] Troubleshooting
There is no sound.
Check that the volume level is not set to zero.
Check whether the plug is inserted firmly in the headphone jack.
Sound will be impaired if the headphones are not connected properly.
Insert the plug until it clicks into place.
If the plug is dirty, wipe it clean with a soft dry cloth.
If the problem persists after performing the remedies above, use a pen
or paper clip, etc., to press the RESTART button and restart your
Walkman.
[114] Troubleshooting
Content such as music suddenly stops during
playback.
The remaining battery power is low or the battery has run out.
The content may not be supported on your Walkman. Select and play
other content.
[115] Troubleshooting
Noise is generated.
If using your Walkman near a device that emits radio waves such as a
mobile phone, move the Walkman away from the device.
The content such as music on your Walkman may be corrupted.
Connect the Walkman to a Windows computer and use Media Go or
Windows Explorer to delete the content in which the noise occurred
from the Walkman. If you use a Mac computer, use the Finder to delete
95 sur 109
Q&A Sound
Q&A Sound
Q&A Sound
http://helpguide.sony.net/dmp/nwe390/v1/en/print.html
22/02/16 16:12