Sony DPP-FP85 Operating Instructions Manual page 24

When pressing AUTO TOUCH-UP cannot
reduce the red-eye phenomenon of a subject
shot by flash, you can adjust the image
manually.
If you perform additional editing, such as enlarging,
reducing the image size, rotating or moving an image,
after the red-eye correction, the red-eye correction
may not take effect. Perform the red-eye correction
after these editorial operations.
1
From the
':,J.
Edit menu (page 18),
press
<lIt>
to select
r,)
(Red-eye
Correction) and then press ENTER.
The adjustment frame appears on the
image, which indicates the range for red-
eye correction.
Adjustment frame
2
Adjust the position and size of the
adjustment frame.
Make the red-eye correction for the right
and left eyes separately.
• To move the adjustment frame
(DPress <III> to select" (Move) and
press ENTER.
®Move the frame with <l/l>lbJ'l.
The frame moves in the selected
direction.
24
GB
®
Press ENTER.
The frame is fixed in the current
position.
• To change the size of the
adjustment frame
Press
<III>
to select ~ (Enlarge) or ~.
(Reduce) and press ENTER.
Each time you press ENTER, the frame
becomes larger or smaller.
You can also enlarge or reduce the size by
pressing the
~
(zoom in) or
~
(zoom out)
buttons on the printer.
Make the size of the adjustment frame 2 to 7
times as large as the eye size.
3
Press
<lIt>
to select
l:J:J
and press
ENTER.
The range of red-eye correction is
enlarged.
4
Press ENTER.
The adjustment takes effect.
The Red-eye correction menu is
displayed.
To make a red-eye correction for other
eyes, repeat steps 2 to 4.
5
Press
<lIt>
to
select~.
and press
ENTER.
The Edit menu is displayed again.
6
Press PRINT.
To reset the adjustment
Press CANCEL in step 5 instead of ENTER.