Campania International GFRCFT-1100 Long Beach Assembly Instructions

GFRCFT-1100 Long Beach Fountain

Revised August 30, 2017

(1 pieces)

COMPONENTS AND PARTS LIST

66"L x 26.5"W x 48"H

290 lbs

Level

PK800 pump (1)

6" length of 1/2" Black Non-kink tubing (1) **

2" length of 5/8" clear tubing (1) **

This fountain should be covered

2" length of 3/4" clear tubing (1) **

with a water proof tarp over the

2" length of 3/8" copper pipe

winter.

#5 Drain stopper (1)

Hose clamps (2) *

* Hose clamps may be used as flow restrictors

** The tubing has been preassembled

Table of Contents

Do you have a question about the GFRCFT-1100 Long Beach and is the answer not in the manual?

Page 1 GFRCFT-1100 Long Beach Fountain Revised August 30, 2017 (1 pieces) COMPONENTS AND PARTS LIST 66”L x 26.5”W x 48”H 290 lbs Pump Kit Parts List Tools you will need Level PK800 pump (1) 6” length of 1/2” Black Non-kink tubing (1) ** 2”...
Page 2 GFRCFT-1100 Long Beach Fountain (1 pieces) Revised August 3, 2017 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface. 2. Assemble the pump kit a. Attach the 3/4" clear end of the tubing assembly to the pump.