Campania International GFRCFT-1102 Assembly Instructions

Girona fountain - 6 foot (3 pieces)

Download this manual

GFRCFT-1102 Girona Fountain - 6 Foot

COMPONENTS AND PARTS LIST

Pump Kit Parts List

PK800 pump (1)

Wedges (4)

#5 Drain Stopper (1)

24" of ¾" clear vinyl tube

* Tubing has been preassembled

(3 pieces)

This fountain is compatible with a

#10 or #7 Refill Device

Tools you will need

Level

This fountain is not compatible with

SHOP NOW

Revised October 17, 2019

Small Plate

18"W x 18"L x 1"H

15 lbs

Plate

65.5"W x 65.5"L x 1"H

126 lbs

Basin

72"W x 72"L x 26.25"H

486 lbs

Fountain holds

approximately 220

gallons of water

a fountain cover

Page 1 Revised October 17, 2019 GFRCFT-1102 Girona Fountain - 6 Foot (3 pieces) COMPONENTS AND PARTS LIST Small Plate 18”W x 18”L x 1”H 15 lbs Plate 65.5”W x 65.5”L x 1”H 126 lbs Basin 72”W x 72”L x 26.25”H 486 lbs...
Page 2 Revised October 17, 2019 GFRCFT-1102 Girona Fountain - 6 Foot (3 pieces) ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface 2. Unpack the provided pump. a. NOTE: This pump has one adapter, which also acts as a flow valve.
Page 3 Campania International - Fountain Guide Set-up Assembly & Installation A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. 1. Seek Professional Help: Check if professional installation is recommended for your fountain.
Page 4 Troubleshooting Pump Not Working When operating the pump for the first time, it can take a few minutes before water begins to flow properly. If it is still not working after a few minutes, please follow our troubleshooting tips below. Before troubleshooting, UNPLUG YOUR PUMP.