Husqvarna T425 Workshop Manual page 38

Repair instructions
5
Dismantle the pump cover Q and carefully remove
the membrane N with gasket P.
6
Unscrew screws A and lift off cover B and carefully
remove gasket D and control diaphragm C.
7
Unscrew screw J and remove needle valve G with
lever arm F, shaft E and spring H.
8
Use a needle or similar and carefully lift up fuel
screen M.
9
Dismantle high-speed screw L and low-speed
screw K (see fi gure 41).
10
If necessary, dismantle throttle valve T and choke
valve S and remove the shafts with lever arms and
springs (see fi gure 42).
Fig 41
38
- English