Choosing a Startup Image
Setting the Logo
1
Turn the power on, and set the camera to the Playback mode.
Select a still image as startup image.
2
Press
or
Open the menu.
3
Press the MENU button, then use the five-way control button to select [Set Logo]
then press
4
Apply the setting.
Press
or
to apply the setting.
5
Close the menu.
Press the MENU button to close the menu.
C
a
u
t
i
o
n
C
a
u
t
i
o
n
•
The startup image will not be deleted even if the original image is deleted or the
memory is formatted.
on the five-way control button to select a still image.
on the five-way control button to launch the submenu: [Yes]; [No].
on the five-way control button to select [Yes] then press OK/Enter
36