Table of Contents
Advertisement
T
i
p
s
T
i
p
s
The digital zoom works by enlarging the center portion of an image through a
software interpolation process.
The digital zoom is used to achieve magnification levels up to approx. 4 times.
The higher the digital zoom, the lower the image quality.
Using the Flash
The flash is not only for taking pictures when there is insufficient light, but also for when
the subject is in shade or with backlight conditions. Pressing the flash button cycles your
camera through the various flash modes. The flash will not activate during continuous
shooting or movie recording.
1
Turn the power on and set the camera
to the Capture mode (
2
Press
on the five-way control
button (1) to change the flash mode.
Each time the flash button is pressed,
the flash icon (2) changes.
Auto flash:
Flash fires automatically
when shooting conditions
require extra lighting.
Full Flash:
Flash fires every time you take a photo, regardless of lighting
conditions.
Flash OFF:
The flash never fires even in dark conditions.
3
Press shutter button to take a picture.
page 13).
22
Advertisement
Table of Contents
