Page 1
SIMMONS KIDS ® CITY SLEEPER BASSINET INSTRUCTION MANUAL 25504 STYLES AND COLORS MAY VARY ASEEMBLY INSTRUCTIONS WARNING: CHOKING HAZARD Adult assembly required because of small parts. Keep assembly parts out of reach of children under 3 years. Read all instructions BEFORE assembly and USE of product KEEP INSTRUCTIONS FOR FUTURE USE.
Consumer Information WARNING WARNING: Do not use this bassinet if you cannot exactly follow the accompanying instructions. Failure to follow these warnings and instructions could result in serious injury or death. • Read all instructions before assembling unit. KEEP INSTRUCTIONS FOR FUTURE USE. DO NOT USE THIS UNIT IF THE INSTRUCTIONS CANNOT BE STRICTLY FOLLOWED.
Page 3
Before returning this product to the store! Let’s see if we can assist you! • Not sure how to assemble our product? Visit our site for easy to follow instructions along with some Tricks and Tips assembly videos https://www.deltachildren.com/pages/instructions • If you are missing a piece or have a damaged part Please contact our Consumer Experience Center for assistance at 646-435-8726 or email gcs@DeltaChildren.com.
LIMITED MANUFACTURER WARRANTY This Delta product is warranted to be free from defects for a period of 90 days from the date of purchase under normal use. If a product is defective during this period, we will at our option repair or replace the defective part or product.
Page 5
Parts IMPORTANT! Please remove all parts from the package and identify them before assembly Bassinet Fabric Side Frame Stand (Left) Side Frame Stand (Right) Mattress Support Pad Top Support Tube Bottom Cross Support Bar Sheet Hardware *Screw is actual size to scale M6 Screw (X4) Wrench Nut &...
ASSEMBLY Leg Extension Bassinet Frame Assembly Left Side Frame Stand Right Side Frame Stand Bottom Cross Support Bar Fig. 1 Insert support bar into side frame stand Fig. 2 Fig. 1A Secure side frame • Fully extend both sides of the bassinet legs by pressing the button stand and support located on top of the bassinet legs and pull outward...
Page 7
FABRIC ASSEMBLY STEP 1 Support Tube Side Buttons Bolt Fig. 3A Fig. 3B Insert both sides of the top support Fig. 3B tube into the bassinet frame Fully Locked Position STEP 2 Start BACK zipper pull tap is located Front Zipper on left side BACK FRONT...
Page 8
FABRIC ASSEMBLY STEP 3 BACK FRONT START TOP SUPPORT TUBE zipper pull Fig. 3E tap slider Fabric Bassinet Fully Zipped Fig. 3D Place the front bassinet fabric to the front top support tube STEP 4 Mattress Pad With Sheet STEP 3: Place the front bassinet fabric over the front rail tube. NOTE: The mattress support pad should fully cover the bassinet bottom.
HEIGHT ADJUSTMENT STEP 1 Mattress Pad With Sheet WARNING: NEVER adjust height with baby inside. NOTE: To adjust up or down you must unlock EACH SIDE separately. STEP 2 & 3 FRONT Locking Housing BACK Lever Support Bar STEP 4 Mattress Pad With Sheet 5 POSITIONS STEP 1: Remove mattress support pad...
Page 10
DISASSEMBLY Removing Fabric Bassinet Frame Disassembly Mattress Pad With Sheet Front and Back Front and Back Side Buttons Side Buttons Bolt Fig. 1 Fig. 2A Undo nut and bolt, then press front and back side buttons on the support tube and lift upward to remove. Repeat on opposite side. Fig.
CARE AND MAINTENANCE • Check bassinet for worn parts, torn material • The frame may be wiped clean using a mild or stitching periodically. cleaning solution and a damp cloth. Do not use bleach. Do not use harsh or abrasive •...
Need help?
Do you have a question about the 25504 and is the answer not in the manual?
Questions and answers