Table of Contents
Advertisement
•
Auxiliary Items: Do not use an inverter, adaptor or extension cord with this
appliance. If the cord is too short, have a qualified electrician install an outlet near
the appliance. Use of an extension cord and an inverter can negatively affect the
performance of the unit.
•
Protect from moisture: To protect against the risk of electric shock, do not immerse
the unit, cord or plug in water or spray it with any other liquid. Do not connect or
disconnect the electric plug when your hands are wet. Turn the power switch off
before removing the plug from the socket.
•
WARNING: Disconnect! To reduce the risk of fire, electric shock or personal injury,
always unplug the appliance from the socket when not in use, when moving and
before cleaning or servicing. Never unplug the unit by pulling the power cord.
Always grip the plug firmly and pull straight out from the power point.
•
Electrical work: Any electrical work required for the installation of this appliance
should be carried out by a qualified electrician.
Never use this appliance with a damaged refrigerant circuit! If the coolant circuit becomes
damaged, avoid proximity to open fires and all types of heat sources. The room in which the
appliance is located should be ventilated for a few minutes.
Installation
Heavy: This appliance is heavy, take care when moving it. To avoid back or other injuries,
consider a two-person lift or mechanical aid when installing it. Failure to do so can result in
back or other injury.
Damage: When unpacking, check the appliance carefully for damage. If it is damaged, do
not install the appliance. Contact the after-sales support centre on 1300 256 426 for advice
on examination or return of the damaged appliance.
Protect from moisture: Install the appliance in an indoor area protected from wind, rain,
water spray or drips.
Protect from heat: Do not install the appliance next to an oven, grill or other sources of high
heat or where it will be exposed to direct sunlight for prolonged periods.
WARNING: Ventilation: To ensure proper ventilation, keep any ventilation openings, in the
appliance enclosure or the built-in structure, clear of obstructions. Ensure adequate air
circulation around the appliance to prevent overheating.
Level: Install the appliance level to ensure proper operation.
Cleaning and Maintenance
Disconnect: Unplug the appliance before cleaning or servicing. Failure to do so can result in
electric shock, injury or death. Do not connect or disconnect the plug when your hands are
wet.
Flames: Do not let open flames or ignition sources enter the appliance.
Flammable/explosive substances: Never clean this appliance with flammable fluids. Do not
store or use volatile, flammable or explosive propellants or liquids in or close to this or any
other appliance. The fumes can create a fire hazard or explosion.
Solvents: Do not use solvent-based cleaning agents or abrasives on the interior as these
may damage or discolour the surfaces of the appliances.
Advertisement
Table of Contents
