Table of Contents
Advertisement
third (earth) prong from the power cord. If the plug does not fit your outlet, consult a
licensed electrician for advice to have the outlet changed.
•
Plug the unit into a dedicated, properly earthed wall outlet. Ensure that your outlet
voltage and circuit frequency correspond to the voltage stated on the rating label.
•
Secure the bar fridge's supply cord behind the unit. Do not leave it exposed or
dangling to prevent injury and accidental disconnection from the power supply
•
Adjust the temperature control as described below,
•
When first starting up and after a period out of use, allow the unit to cool down for
at least 2-3 hours (4 hours if starting up during warm weather in summer) before
placing food in the bar fridge.
Schematic Diagram of the Levelling Feet
The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor.
Adjusting procedures:
•
Turn the feet clockwise to raise the refrigerator;
•
Turn the feet counterclockwise to lower the refrigerator;
•
Adjust the right and left feet based on the procedures above to a horizontal level.
Advertisement
Table of Contents
