Charging Instructions; Cleaning Instructions - Illumiflow 272 User Manual

CHARGING INSTRUCTIONS
1. Disconnect the USB end of the Extension Cord from the Battery Pack.
2. Insert the AC Adapter cord micro USB connector into the micro USB port in the bot-
tom of the Battery Pack.
3. Plug the AC Adapter into a grounded wall unit to begin charging the Battery Pack.
The blue indicator lights on your Battery Pack will blink while it is charging.
THE
ILLUMIFLOW 272 LASER CAP MUST NEVER BE CONNECTED TO THE AC ADAPTER.
THE CAP SHOULD ONLY BE POWERED BY THE BATTERY PACK.
4. When the Battery Pack has reached full charge, all 4 blue indicator lights on your
Battery Pack will be steadily illuminated (not blinking).
Your Battery Pack
will
last between three and four 30-minute sessions before running out of
charge. It has been designed for a minimum of 500 re-charges.
The red lasers of your Laser cap turn on as soon as the power button on the Battery Pack
is
pressed. Make sure that the cap
is
comfortably in position on your head before turning the lasers
on.
CLEANING INSTRUCTIONS
Confirm that the power is turned off at the Battery Pack, and then disconnect the USB
end of the Extension Cord from the Battery Pack. NEVER attempt to clean the Laser Cap
while connected to power. Wipe down the inner surface of the Laser Cap with a clean,
damp cloth or use an alcohol pad. DO NOT use copious amounts of water and DO NOT
immerse the device in water.