Usage Instructions - Illumiflow 272 User Manual

USAGE INSTRUCTIONS
1. Unpack the box. Identify the box contents and confirm all the pictured components are
present and that they appear to be undamaged.
Before operating, please note the following: THE ILLUMIFLOW 272 LASER CAP SHOULD
NEVER BE CONNECTED TO THE WALL CHARGER. THE CAP SHOULD ONLY BE POWERED BY
THE BATTERY PACK.
2. Connect the Laser Cap Cord to the Extension Cord. The Laser Cap Cord has a female con-
nector that fits together with the male connector on the Extension Cord. Insert the Exten-
sion Cord connector (2) into the Laser Cap Cord connector (1). Lock the connectors togeth-
er by twisting the nut on the Laser Cap Cord (1) clockwise. Note: Each connector has an
alignment arrow to ensure the proper connection. See illustration 2.1 below for reference.
3.
Insert the standard USB end of the Extension Cord (2) into the standard sized port on top of
the Battery Pack (5). See illustration 2.2 below for reference.
4. Place the illumifiow Laser Cap on your head and press the power button on the Battery
Pack to start. The lasers inside the Laser Cap will turn on.
5. The Laser Cap will automatically shut off after recommended treatment time of 30 minutes.
6.
If you wish to manually end your treatment session prior to the automatic shut off, you can
do so by pressing and holding (5 secs) the power button on the Battery Pack.
illustration 2.1
"' j,
gnarrows
illustration 2.2
S
11W.
As
or
Functionality Note:
The illumiflow 272 Laser Cap Diodes have been designed to PULSE / BLINK during use. The Laser Cap
will BEEP every 10 minutes to indicate the progression of your treatment session.
Usage Note:
It is recommended to wear the illumiflow 272 Laser Cap for 30 minutes, 3-4 times per week, on
alternating days.
4