EnGenius EWS850AP User Manual page 18

Wall mounting the EWS850AP
A. Determine where the Access Point to be placed and mark
location on the surface for the four mounting holes of
wall mount base.
B. Use the appropriate drill bit to drill two 8.1mm
diagram and 26mm depth holes in the markings and
hammer the bolts into the openings. Screw the anhors
into the holes until they are flush with the wall.
C. Screw the included screws into the anchors.
D. Slide the mount bracket into the slot of the Access
Point.
Pole mounting the EWS850AP
A. Thread the open end of the Pole Strap through the two
tabs on the Pole Mount Bracket.
B.Lock and tighten Pole Strap to secure Pole Mount Bracket
to the pole.
18