Mounting the TV Important information: Prior to installation onto the TVL3, remove the stand which is attached to your flat screen TV. Carefully measure all dimensions of the television before proceeding with the installation. Step 1: Secure the TV Lean the TV onto its edge, preferably against a soft surface to prevent scratches and or damage. Step 2: Install the Mounting Plates (Fig.
Installation of the Controller 1. Plug the TV lift into “MOTOR 1” of the 2. Plug the Power TH717. Supply into the TH717. 3. Plug the Power Supply into the wall & turn on the power.
Page 7
Using the TV Lift TV Lift Control (Channel 1) Channel Selected Raise TV Short Press: Go to favourite position. Long Press: Lower TV completely Lower TV Select Channel...
Page 8
Using ‘The Hub’ Bluetooth App Download The Hub Download & install TecHome Open ‘The Hub’ on your Enter your PIN code (default ‘The Hub’ from the ‘Google Play’ 0000) & select the device you phone or smart device and or ‘Apple Store’ .
Page 9
Setting Your Favourite Position Install ‘The Hub’ & open the app ( page 7 Enter “TVL BT” and press the TV Lift Channel. Press the settings ( ) icon on the top right. Scroll down to “Preset Bay 1” and choose your favourite position (in %).
Page 10
Learning a New Remote Using a paper clip, hold the front red button (F) for 3 seconds. A buzzer will beep every second with a blue LED ashing every 2 seconds. Any button can be pressed on the new remote to pair it The buzzer will then beep 8 times to indicate successful pairing 3 Secs Learn a New Remote using...
Page 11
Dimensions & Ports TV Lift Remote learn/delete button Power Supply TV Lift Dimentions...
Page 12
Disclaimers Do not obstruct the TVlift Do not put hands in the mechanism (i.e. make sure kids & animals stay clear) Proof of Purchase This warranty is only valid to the original purchaser and is not transferable. Please keep your receipt for warranty purposes, please present your receipt when claiming warranty as proof of purchase date.
Need help?
Do you have a question about the TVL-BT and is the answer not in the manual?
Questions and answers