Download Print this page

Techome TVL3 Quick Installation And Instruction Manual

Tv lift
Hide thumbs Also See for TVL3:

Advertisement

Quick Links

DELETING THE MAX/MIN HEIGHT LIMITS
1. Adjust the TV Lift height to the
desired max or min height you wish
to delete. Using 'UP' or 'DOWN'.
OR
3. Hold 'UP' (For Max) or 'DOWN'
(For Min) on the Switch Box for 3 seconds
until you hear a continuous beep.
3 sec
SETTING A MEMORIZED HEIGHT
1. Adjust the TV Lift height to the
desired height. Using any remote.
OR
3. Pressing the 'M' button will now set
the TV Lift to the memorized height.
3
2. Flick the 'SET' switch to the right
on the Switch Box.
4. Return the 'SET' button back to
the left again to regain control of
the TV Lift.
2. Press and hold the 'M' button
on the RF Remote until you hear
three (3) beeps.
TECHOME TV LIFT (TVL3)
QUICK INSTALLATION AND
INSTRUCTION
MANUAL
www.techome.com.au
info@techome.com.au | +61 (0)7 3297 9797

Advertisement

loading
Need help?

Need help?

Do you have a question about the TVL3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Techome TVL3

  • Page 1 Using any remote. on the RF Remote until you hear three (3) beeps. QUICK INSTALLATION AND INSTRUCTION 3. Pressing the ‘M’ button will now set the TV Lift to the memorized height. MANUAL www.techome.com.au info@techome.com.au | +61 (0)7 3297 9797...
  • Page 2 3. Hold ‘UP’ on the Switch Box the left again to regain control of until you hear two consecutive the TV Lift. beeps, indicating successful setting. TVL3 IR Receiver Switch Box PAIRING THE RF REMOTE SETTING THE MINIMUM HEIGHT LIMIT 1.