Switch On And Off And Run-Out Function; Increase And Decrease The Power Level; Low Extraction Position; High Extraction Position - Novy Up 40 00 Series Operation Instructions Manual


INFO: Provide adequate ventilation in the kitchen for
optimal efficiency of the recirculation system.

6.3 Switch on and off and run-out function

Extraction tower
Switch on
Press
or turn on valve.
or press the extraction tower upwards.
Switch on run-out function
Press
Switch off
Press
or close the valve.
or press the extraction tower downwards.
Run-out function: This function starts at the end of cooking.
For a fixed time, the remaining cooking vapours will be extracted
from the kitchen by the extraction tower at low extraction mode.
When recirculation is selected, the filters are also dried.
The run-out time is set to 30 minutes by default in the recircula-
tion mode and 10 minutes in exhaust mode. It is recommended
to carry out this function completely. At the end of the run-out
time, the motor and the extraction tower will automatically
switch off.

6.4 Increase and decrease the power level

The extraction tower can be set to 3 levels + power, indicated
via the 4 LEDs with increasing intensity per level.
Activate a higher power level if strong odours or vapours are
present. The extraction tower then works at a higher flow rate.
Increase the power
Press [+]
Decrease the power
Press [—]

6.5 Low extraction position

The extraction can be started by tilting the valve on the
extraction tower.
The extraction speed can be set by the [+] and [—] button on
the hood touch control.
Display
LED
lights up
Switch on
1st LED
Turn valve towards the desired position
blinks
Switch off
Close valve
LED

6.6 High extraction position

off
The extraction can be started by pressing the valve of the
extraction tower.
The tower automatically moves to a position of 10 cm.
The extraction speed can be set by the [+] and [—] button on
the hood touch control
Switch on
Press the extraction tower upwards
Switch off
Press the extraction tower downwards
– 59 –
Adjusting the power level:
Low extraction position
High extraction position
Brighter
LED(s)
LED(s)
dim
Low