Locking The Controller; Induction Hob One Pro; Control Panel Extraction Hood; Control Panel - Novy Up 40 00 Series Operation Instructions Manual

Using the timer without cooking
Timer without cooking
Switch on the hob
Press for 2 seconds
Select the time
Press [—] and [+] simultaneously
Reduce the time
Press [—] on the timer
Increase the time
Press [+] on the timer
The time has been selected and the countdown has begun.
Turn off automatically at the end of the cooking time:
As soon as the selected cooking time is complete, the display
00
will flash , an audible sign will be heard, and the cooking
zone will turn off. To stop the buzzer and flashing light, press a
control button.

4.1.7 Locking the controller

To avoid a hob selection being changed, during cleaning for
example, the controller must be locked (except the on/off
button).
Locking
Lock
1. Switch on the hob using the
2. Press the [—] and of the back zone
simultaneously.
3. Press the button of the back zone
again.
Unlock:
1. Switch on the hob using the
2. Press the [—] and of the back zone
simultaneously.
3. Press the [—] button again.
Display
00
30‐
29...
01‐
02...
Display
button.
L
button.
0
– 56 –

5 INDUCTION HOB ONE PRO

5.1 Control Panel extraction hood

5.1.1 Control panel

8.
Hob control
On/off control key for the hob
Power level indication
Cooking zone selection
Increase power level
Reduce power level

5.1.2 Switch on and off

Switching the hob on and off:
Switch on
Press and continue to hold for 2 sec
The LED will light up
Switch off
Press
LED goes out
Switching a cooking zone on and off:
Set up
Press the cooking zone selection button.
Switch off
Press the cooking zone selection buttons
and simultaneously until the display shows
0 H
or = "hot".
If there is no control input within 20 seconds, the electronics will
return in standbye setting.

5.1.3 Pan detection

This hob is equipped with an interactive control system that
makes using the hob even easier.
When you place a pan on the hob, it is automatically detected.
0
You will also see a to show you which slider to use for the
zone in question. The pan detection ensures optimum safety.
The induction hob does not work:
– If there is no pan on the cooking zone or if the pan is
unsuitable for induction. In this case, it is impossible to put
the power on and the symbol will flash on the display.
– The operation is suspended when the pan is removed from
the cooking zone during cooking. The
8.
Display
00
0
H
symbol will flash