Model Nomenclature; Initial Inspection - Water Furnace SAH Series Installation Manual

SAH AIR HANDLER INSTALLATION MANUAL
Nomenclature
Model
SAH – Series Air Handler
S i Ai H
Unit Capacity
Refrigeration (DX)
022 MBTUH
026 MBTUH
030 MBTUH
036 MBTUH
042 MBTUH
048 MBTUH
060 MBTUH
066 MBTUH
Vintage
* = Factory Use Only
Electric Heat
00 – None
05 – 5kW (022 – 036 only) No Breakers
10 – 10kW (036 – 066 only) No Breakers
15 – 15kW (042 – 066 only) with Breakers
20 – 20kW (060 - 066 only) with Breakers
Note: To field convert the SAH to bottomflow air discharge. The SAHBCK kit must be ordered separately.
Note: Air flow on the 060 and 066 units in the horizontal configurations should be limited to 1900 cfm in
cooling mode, or condensate blow off may occur.
1. Only available with Aurora controls in the compressor section.

Initial Inspection

When the equipment is received, all items should be care-
fully checked against the bill of lading to be sure all crates
and cartons have been received. Examine units for shipping
damage, removing the units from the packaging if necessary.
1-3
4-6
SAH 036 *
dl
8-9 10 11 12
7
13
00 1 A R 1
Units in question should also be internally inspected. If any
damage is noted, the carrier should make the proper nota-
tion on the delivery receipt, acknowledging the damage.
4
14
15
16
S
1 *
Build
*Factory Use Only
Position
1 – Multi-position
Future Options
S – Standard
Voltage
1-208-230/60/1
Air Coil
R – Refrigerant
Controls/ Motor
A – Standard/ 5 Speed ECM
C – Aurora AHB/ Variable Speed ECM
TXV
1 – Factory Installed
Rev.: 2/27/2017
1