Usb docking kit for use with mobile rack removable docking modules with 3.5"/2.5" hdd or optional ziptm/superdisktm ls-120/mo/tr-4 tape, digital film memory reader or cd-rom drives (8 pages)
Summary of Contents for VIPowER VP-8059
Page 1
MODEL VP-8059 MODEL VP-8059L FireWire 1394dock Docking Kit for use with Mobile Rack Removable Docking Modules with 3.5"/2.5" HDD or Optional zip SuperDisk LS-120, MO, TR-4 Tape, Digital Film Memory Reader or CD-ROM drives Installation Manual We are your DataBridge...
3-1 Disconnecting the FireWire 1394dock ... 6 4-1 Accessories ... 6 ViPowER Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ViPowER Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Mobile Rack without interrupting the current operation. This manual will guide you through the hardware installation of the following FireWire 1394dock models: Model VP-8059 Model VP-8059L FireWire 1394dock Docking Kit (without Mobile Rack) 1-1.1 FireWire 1394dock Features •...
• One +5V +12V AC/DC power adapter and power cord • One FireWire 1394 cable • Mounting screws (16 screws) (for Model VP-8059 only) • One Mobile Rack Stand Set (4 pieces) (for Model VP-8059 only) • One Mobile Rack (VP-10LSF) (for Model VP-8059 only) +5V/+12V...
• For use with the Mobile Rack: please refer to the Mobile Rack Installation manual for instructions for installing devices in the Mobile Rack drive case. 2-1.1 Install Stand Set on Mobile Rack (Model VP-8059) A 4-piece stand set is included to help heat dissipation and provide secure placement of the Mobile Rack.
2-1.2 Setting Up the FireWire 1394dock for Operation LED Indicators Power +5V +12V External Power Connector Power On/Off Switch FireWire 1394 Connectors FireWire 1394dock Power Switch & Connector Locations Perform the following steps (in the order given) to set up the FireWire 1394dock with your peripheral device for operation: 1.
Page 7
2. Using the +5V/+12V AC/DC Power Adapter: a. With the power switch in the OFF position, plug in the 6-pin connector-end of the power adapter into its corresponding +5V/+12V power-in connector on the FireWire 1394dock. b. Plug one end of the power cord into the power adapter and the other end into an AC power source outlet.
3-1 Disconnecting the FireWire 1394dock Perform the following steps to disconnect the FireWire 1394dock from your computer. 1. Turn off the power by sliding the power switch on the 1394dock to the OFF position. (Note that the drive icon will disappear from the computer screen.) 2.