1-1.1 Firewire 1394Dock Features; 1-1.2 Ata/Atapi Device Compatibility; 1-1.3 Power Requirements; 1-1.4 Unpacking Your Firewire 1394Dock Docking Kit - VIPowER VP-8059 Installation Manual

1-1.2 ATA/ATAPI Device Compatibility

• ATAPI removable drives: Iomega Zip 100MB/250MB and Clik!,
LS-120 Super Floppy, Sony HiFD 200MB, MO drives, tape drives
• Enhanced IDE and ATA hard drives: both 2.5" and 3.5" form factors,
any capacity
• ATAPI CD-ROM drives: CD-ROM, CD-R, CD-RW, DVD drives,
compatible with all major CD-RW software
• ATA removable media drives: SyQuest SyFlyer, SparQ and Syjet, Castlewood
ORB. Supports media change and disk ejection

1-1.3 Power Requirements

• +5V devices: +5V devices can draw power directly through the 1394 port
connection, the +5V/+12V power adapter, or an optional +5V power adapter
• +5V/+12V devices: +5V/+12V devices require the use of a +5V +12V
AC/DC power adapter (included)
Typical power requirements for ATA/ATAPI device types:
Drive Type
Zip
LS-120 SuperDisk
MO
Tape
2.5" HD
3.5" HD
CD-ROM
It is recommended that the +5V/+12V power adapter be used for
all devices whenever possible to avoid any power problems.

1-1.4 Unpacking Your FireWire 1394dock Docking Kit

Before installing the FireWire 1394dock, verify that the following items are included
in the carton. If any parts are damaged or missing, please contact your local dealer or
sales representative immediately.
• One FireWire 1394dock interface unit
• One +5V +12V AC/DC power adapter and power cord
• One FireWire 1394 cable
• Mounting screws (16 screws) (for Model VP-8059 only)
• One Mobile Rack Stand Set (4 pieces) (for Model VP-8059 only)
• One Mobile Rack (VP-10LSF) (for Model VP-8059 only)
2
+5V
X
X
X
X
IMPORTANT
FireWire 1394dock Installation Manual
+5V/+12V
X
X
X