Installation; 2-1.1 Install Stand Set On Mobile Rack (Model Vp-8059) - VIPowER VP-8059 Installation Manual

Power Adapter
Power Cord
FireWire
1394 Cable
FireWire
1394dock
FireWire 1394dock Docking Kit Components (with Mobile Rack)

2-1 Installation

Refer to the following for setup of the FireWire 1394dock for operation.
®
• For Mac
1394dock with Mac computers. This must be purchased separately.
• For use with the Mobile Rack: please refer to the Mobile Rack Installation
manual for instructions for installing devices in the Mobile Rack drive case.

2-1.1 Install Stand Set on Mobile Rack (Model VP-8059)

A 4-piece stand set is included to help heat dissipation and provide secure placement
of the Mobile Rack. After mounting the device in the Mobile Rack, slide a stand pad
onto each corner .
FireWire 1394dock Installation Manual
user's: A software driver is required for operation of the FireWire
Mobile Rack Stand Set Installed
+5V/+12V
Power Adapter
Mobile Rack
Docking Case
Mobile Rack
Drive Case
Mobile Rack
Stand Set
Stand Pad
(With Raised Nub
on Bottom)
(x4)
3