2-1.2 Setting Up The Firewire 1394Dock For Operation - VIPowER VP-8059 Installation Manual

2-1.2 Setting Up the FireWire 1394dock for Operation

Power
+5V +12V
External
Power Connector
Power On/Off
Switch
FireWire 1394dock Power Switch & Connector Locations
Perform the following steps (in the order given) to set up the FireWire 1394dock
with your peripheral device for operation:
1. Plug the FireWire 1394dock's 50-pin connector into the connector on the
device you plan to connect to your computer.
a. External devices that provide a 50-pin Centronics interface connector
support direct connection with the FireWire 1394dock.
b. Internal devices such as EIDE hard drives or ATA/ATAPI devices can be
mounted in the Mobile Rack drive case. (Refer to the Mobile Rack manual for
instructions on mounting these devices in a Mobile Rack.)
Make sure the Power switch on the 1394dock is set to the
RIGHT, power OFF position before proceeding.
4
LED Indicators
Drive Activity
FireWire 1394
Connectors
FireWire 1394dock Power Switch Settings
IMPORTANT
POWER
ON OFF
Power OFF
Position
FireWire 1394dock Installation Manual
50-Pin Centronics
Device Connector