Table of Contents
Advertisement
Connections
(cont.)
CAUTION
• Before making any connections, turn off all the equipment.
• DO NOT connect the power cord until all connections are completed.
• Use a cord whose plugs correctly match the terminals on this monitor and the equipment.
• Plugs should be firmly inserted; poor connections could cause noise.
• When unplugging a cord, be sure to grasp it's plug and pull it out.
• Refer also to the user manual of each piece of equipment.
R
L
To external
speakers
To stereo audio
(See page 6.)
input terminals
Amplifier, etc.
To RS-232C
To RS-485
To RS-485 input
terminal
output
terminal
terminal
External control input
External equipment used to
terminal of other
control the monitor
equipment
(See pages 17 to 19.)
(See page 17.)
Connect the VIDEO IN A OUT terminal to the video input terminal of another monitor, etc.
CAUTION
• Since the IN terminal and OUT terminal are loop-through terminals, the devices connected to the OUT terminal should be correctly
terminated. Otherwise, pictures become abnormally bright or the display screen gets affected abnormally.
R
L
To stereo audio
To video
To S-video
output terminals
output
output
terminal
terminal
(BNC)
Playback component such as a VCR
When all the connections
are completed
or
*
To audio
To component video or RGB
output
output terminal (BNC)
terminal
Playback component such as a PC or VCR
* For component video connection, connect only to the green, blue, and red terminals.
Power cored
(supplied)
8
To RGB
To digital
output
output
terminal
terminal
To wall outlet
Advertisement
Table of Contents
