VIPowER VPM-62289 User Manual page 11

Step3.
a) Replace the top cover over the drive assembly, making sure the
side groove guide of the top cover slides within the side groove
guide of the bottom cover.
b) Slide the top cover forward until it fits tight within the front groove
guide.
c) Make sure the top and bottom groove guides are matched and
form a tight fit.
d) Replace the three screws which were removed in Step 1 from
the back of the enclosure.
5.25" Device
Mounting Screws(x3)
VPM-62289 USER MANUAL
Top Cover
Bottom Cover
(Push forward)
(See the inside of
the assemblage)
11