VIPowER VPM-6228H User Manual page 30

Step4:
For the first screen of FDISK, answer the question:
Do you want to enable large disk support?
[Y] if you want to build a partition larger than 2GB.
[N] if you want to build a partition small than 2GB.
Step5:
The next screen is [FDISK OPTIONS]. Type [5] to select the disk.
Important:
You must type [5] in this screen to change the current fixed
disk drive to build a partition. The default fixed drive set by
FDISK is your internal hard disk drive.
If you don't change the fixed disk drive to
the USB 2.0 Hard Disk, the data of your
internal hard disk will be destroyed!
Step6:
In the [Change Current Fixed Disk Drive], type the disk drive num-
ber that is assigned to the USB 2.0 Hard Disk.
Step7:
Go back to [FDISK OPTIONS] screen, Now you can create or
delete a partition of the USB 2.0 Hard Disk.
30
WARNING!!
VPM-6228H USER MANUAL