Windows Me/2000/Xp - VIPowER VPM-6228H User Manual

3-2 Windows Me/2000/XP

Step1:
If you are plugging the USB External Drive into your computer for
the first time, the system will detect a USB 2.0 Storage Device and
install the [USB Mass Storage Device] driver from system files
automatically.
Step2:
After the system installs the USB mass storage device driver,
double click on [MyComputer]. A new drive [Usbdisk] icon should
have been added. It is the USB 2.0 External Drive which just installed.
This USB 2.0 External Drive is supported by the Mass Stor-
age Device Driver in Windows Me/2000/XP operating
systems. You do not need to install any driver after you fin-
ish installing the Windows 2000 Service Pack 4/Windows XP
Service Pack 1 in the Windows operating system.
If the new drive does not appear in [My Computer], it means
this USB 2.0 External Drive is a brand new hard disk drive
which does not contain a partition. Please refer to Chapter
5 "Partitioning an External USB 2.0 Hard Disk" to prepare
your USB 2.0 External Disk.
24
Notes:
VPM-6228H USER MANUAL