Advertisement
PRECAUTIONS
1. It is recommended that you only use this device once a day.
2. Make sure the pad's surface area is wiped clean before you use the device.
3. Keep your feet on the pad's surface area during a massage. Once your feet are
taken off the surface area, the device will need to be restarted.
4. When adjusting the intensity settings, gradually increase the settings until you
reach your level of comfort.
5. Only use the provided remote control.
BATTERY ASSEMBLY
1. Open the battery cover.
2. Use a CR2032 lithium-ion battery.
3. Put the side with the "+" symbol face up and insert it gently into the slot.
4. There is typically no need to remove the battery. However, if you need to remove it,
use your fingernail or a small, non-metallic object to remove it. Do not damage the
battery.
5. Close the battery cover.
CHARGING INSTRUCTIONS
1. You can charge this device with a USB adapter (not included) or by connecting it to
your computer's USB port (Adapter specs: 5V-1A).
2. The light indicator turns red while the device is charging. The light indicator will turn
off once the device is fully charged.
MAINTENANCE
1. Clean off the pad's surface area after each use. Use a wet tissue or cloth to wipe off
sweat.
2. Do not rinse or immerse the device in water.
3. If you don't use this device for an extended period of time, store it safely in a clean,
dry area.
4. Do not disassemble or destroy this device.
- 3 -
Advertisement
