Advertisement
REMOTE CONTROL
RELAX
TIGHTEN
INTENSIFY
DISPLAY SCREEN
UPSHIFT BUTTON
DOWNSHIFT BUTTON
INSTRUCTIONS
1. Clean your feet and the pad's surface area.
2. Place both feet on the surface area of the pad at the same time.
3. Connect the main unit to the contact points of the Foot Therapy Pad. Press and
hold the "M" button on the main unit to turn it on.
4. Select the mode and appropriate intensity setting via the main unit or the remote
control. Press the "M" button to switch modes. Press the "+" button to increase/
upshift to a higher intensity setting. Press the "-" button to decrease/downshift to
a lower intensity setting.
5. Enjoy a relaxing foot massage. (Note: This device is automatically set on a
30-minute timer, which can be adjusted according to personal preference.)
PRACTICE MODE
Warm up your feet
Mode 1: 30 minutes - Low intensity
Strengthen your foot muscles
Mode 2 & 3: 30 minutes - High intensity
Mode 4: 30 minutes - Medium intensity
Deep massage
Mode 5: 30 minutes - High intensity
Mode 6: 30 minutes - Medium intensity
KNEAD
JITTER
PUNCH
SWITCH MODE BUTTON
BATTERY PLACEMENT
- 2 -
Advertisement
